Publicité
DESCRIPTION OF SYMBOLS
EN
SHOWN ON THE DISPLAY
Symbol
T1, T2, T3, T4, T5, T6
SYMBOLS FOR NOTICE AND WARNINGS
Symbol
|
10
Description
Pellet boiler temperature
Outdoor temperature
Swimming pool water temperature
Stand- pipe or return- pipe temperature
Measured temperature
Set point or calculated temperature
Temperature sensors T1, T2, T3, T4, T5 and T6.
Description
Notice
In case of exceeding the maximum temperature or activation of
protection function, the controller indicates the event with flashing
symbol on the display. If the maximum temperature is no longer
exceeded or if the protection function is turned off, a lited symbol
indicates a recent event.
Press
to open the screen to check notifications.
Warning
In the event of sensor failure, pump error or flow sensor error, the
controller indicates the failure with flashing symbol on the display. If the
issue is resolved or no longer present, a lited symbol indicates a recent
event.
Press
to open the screen for warnings.
User and settings manual
Publicité
