Publicité
MENU STRUCTURE
EN
AND DESCRIPTION
OPERATION MODE SELECTION
In group "OPERATION MODE" select the required controller operation mode.
You can select between automatic mode, controller switch-off and manual mode.
You choose the required mode by pressing buttons
button
. You exit the setting by pressing button
Description of operation mode:
Automatic operation
Heating is active.
In the automatic operation mode, the controller enables activation and deactivation
of additional energy sources (for example: oil boiler, heat pump, electric heater,
etc.).
To activate or deactivate additional sources, select the
automatic operation mode has already been selected. A new screen with additional
sources will appear, where you can move through sources with buttons
and
deactivate. Symboll
with buttons
Controller switch-off
Controller is not performing system control and switches off all outputs.
All temperatures are still measured and shown. Protection functions are still active
and able to switch on output.
Manual mode
This mode is used for testing the heating system or in case of a malfunction. Every
output can be manually activated or deactivated.
* Depends on model of controller.
|
18
. By pressing the
button, select the source you wish to activate or
or
will begin to flash. You can change the source status
and
. Exit the setting by pressing the
By pressing buttons
move among individual outputs R1-R2*. Select the output of
which state you want to change by pressing the
Values ON, OFF, AUTO or pump RPM 40 %, 55%, 70 % and
85 % will begin to flash. Now you can change the output
status with buttons
tion by pressing the
the
button.
,
and confirm it by pressing
.
icon again, when the
and
, move through
and
. Confirm the selec-
button. Exit the setting by pressing
User and settings manual
button.
button.
Publicité
