Withdrawing Locking Authorisations From All User Keys - Häfele dialock EPC Notice D'emploi Et De Montage

Withdrawing locking authorisations from all user keys

If a user key is lost and shall not be authorised any longer, the locking author-
isations has to be withdrawn from all user keys.
Afterwards all locking authorisations must be re-allocated to the
respective user keys (see Allocating locking authorisation to a user
key). Do not carry out this procedure before a user key is at hand.
1. Present the red clearing key card to the external knob.
The red LED flashes briefly and an acoustic signal is audible.
Afterwards the red LED flashes for 5 seconds.
2. Present the green programming key card to the external knob.
The red LED flashes briefly and an acoustic signal is audible.
All locking authorisations have been withdrawn.
The EPC electronic profile cylinder switches off automatically.
3. Re-allocating locking authorisations to all user keys.
EPC Electronic Profile Cylinder - Status 05.2008 - 732.29.490
Installation and Operating Instructions
37