Preparation - Häfele dialock EPC Notice D'emploi Et De Montage

Door leaf
Upper edge of outside
escutcheon
Fig. 3

Preparation

These installation and operating instructions are based on the assumption
that the mortise lock has already been installed and that the EPC electronic
profile cylinder is to be installed. Any soiling in the lock pocket, such as
metal cuttings or wooden chips, must be removed first.
EPC Electronic Profile Cylinder - Status 05.2008 - 732.29.490
Installation and Operating Instructions
Drill hole for forend
screw
Upper edge of inside
escutcheon
Dimensions A and B are important
for ordering:
A = External dimension [mm]:
Distance between the outer edge of the
escutcheon and the centre of the fo-
rend screw drill hole
B = Internal dimension [mm]:
Distance between the inner edge of the
escutcheon and the centre of the fo-
rend screw drill hole
31