Allocating Locking Authorisation To A User Key; Withdrawing Locking Authorisation From A User Key - Häfele dialock EPC Notice D'emploi Et De Montage

Allocating locking authorisation to a user key

1. Present the green programming key card to the external knob.
The red LED flashes briefly and an acoustic signal is audible.
Afterwards the green LED flashes.
2. Present the user key that has to be trained to the external knob within 5
seconds.
The green LED flashes and an acoustic signal is audible.
Locking authorisation has been allocated to the user key.
3. Remove user key that has been trained.
The green LED flashes.
Allocating further user keys: Repeat procedure from step 2 onwards.
If no further user key is presented to the knob, the EPC electronic profile cyl-
inder switches off automatically.

Withdrawing locking authorisation from a user key

1. Present the red clearing key card to the external knob.
The red LED flashes briefly and an acoustic signal is audible.
Afterwards the red LED flashes for 5 seconds.
2. Present the user key that has to be cleared to the external knob.
The red LED flashes briefly and an acoustic signal is audible.
The locking authorisation has been withdrawn.
36 EPC Electronic Profile Cylinder - Status 05.2008 - 732.29.490
Installation and Operating Instructions