Switch Mobile Unit On/Off; Phoning With The Mobile Unit (Mu); Calling; Accepting A Call - HumanTechnik Scalla3 combo Mode D'emploi

Masquer les pouces Voir aussi pour Scalla3 combo:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 86

Switch mobile unit On/Off

If the mobile unit is switched off, then it will
be switched on automatically by putting it
into the charge bowl.
Otherwise proceed as before:
If the mobile unit is switched on, press the
key until the device is switched on. The
mobile unit searches for the Base and is
ready.
Press the
key until the device is swit-
ched off to switch the mobile unit off.
Phoning with the mobile unit
(MU)

Calling

1. Press the key
2. Enter the phone number.
3. To end the phone call press the key again
.

Accepting a call

1. The phone rings.
2. Press the key
3. To end the phone call press the key

Phone call with a connected headset

- Calling
1. Press the key
2. Enter the phone number.
3. To end the phone call press the key again
.
- Accepting a call
1. The phone rings.
2. Press the key
through the connected headset.
3. To end the phone call press the key again
.
70 English
.
.
.
to execute the call
Use of the equipment loudspeaker du-
ring a call
1. Press key to switch the equipment louds-
peaker on
receiver continues to be switched on.
2. You can now continue the phone call
through the equipment loudspeaker and
the installed microphone.
3. Press key to switch the equipment louds-
peaker off
Adjusting the volume of the equipment
loudspeaker
In hands-free mode, you can adjust the vo-
lume of the equipment loudspeaker by using
the keys
the left side of the phone.

Redial the last dialed phone number

1. By pressing the key
number will be displayed.
2. Using , you can dial the last dialed num-
bers.
3. Press the
Adding the last dialed numbers to the
phone book
1. By pressing the key
.
number will be displayed.
2. Using , you can dial the last dialed num-
bers.
3. Press »More« and select "Store No." with
»Select«.
4. Enter the number now and select »Save«.
5. If required, you can now still change the
number and select »Save«.
6. Select the desired melody for this contact
and select »Save« to complete this pro-
cess.
. The loudspeaker of the
.
or
, which are placed on
, the last dialed
key to dial the number.
, the last dialed

Publicité

Table des Matières
loading

Table des Matières