Receiver Volume/Treble/Bass Control Settings; Switch Microphone Amplifier On/Off; Hold; Inserting A Dialing Pause (Pabx) - HumanTechnik Flashtel comfort II LB f Mode D'emploi

Receiver volume/treble/bass control settings

The receiver volume can be adjusted during a call with the "Volume" slide switch on the
right side of the telephone.
Additional amplification can be switched on by pressing the button. When ad-
ditional amplification is activated, the receiver volume can be raised to up to 30 dB. If the
amplification is switched on, the status display will light up along with the symbol in
the telephone display.
The amplification also remains on when the receiver is placed back on its cradle. The ad-
ditional amplification is deactivated by pressing the button again.
You can also increase treble or bass tones by an additional 10 dB using the tone control
(slide switch on the right side of the base unit).

Switch microphone amplifier on/off

The «flashtel comfort II LB f» is equipped with adjustable microphone amplification to
enable you to better understand the person you are speaking to when the sound is quiet.
To switch on the microphone amplification, simply slide the switch on the rear panel of the
telephone to "HIGH".

HOLD

This function enables you to interrupt a conversation temporarily without ending the call.
Press the HOLD button to interrupt the conversation temporarily.

Inserting a dialing pause (PABX)

Press the button to interrupt dialing for 1-6 seconds.

Inquiry button (Hook/Flash)

This function is required in order to activate certain T-Net features. If you press the R
button, the telephone line is interrupted for a certain length of time. Fixed setting standard
260 ms.
English 39