Playback Outgoing Message; Listen To Messages (Mu); Erase All Messages (Mu); Brief Message Recording (Memo) - HumanTechnik Scalla3 combo Mode D'emploi

2-1) Listen to messages (MU)

The phone shows tape symbol on the dis-
play if you have received a new message.
1. Press the »Menu« key and select the
»ANS. Machine« entry with
2. Press »Select«.
3. Select »Message« and confirm with »Se-
lect«.
4. Select »MSG Playback« and confirm with
»Select«.
5. The recordings will now be played back.

2-2) Erase all messages (MU)

1. Press the »Menu« key and select the
»ANS. Machine« entry with
2. Press »Select«.
3. Select »Message« and confirm with »Se-
lect«.
4. Select »Delete all« and confirm with »Se-
lect«.
5. Confirm with »OK«.
6. The recordings will now be erased.

2-3) Brief message recording (Memo)

You can leave a message for the user of the
answering machine which can be up to 3 mi-
nutes long.
A tape symbol will be shown on the display
and the letter symbol is illuminated on the
Base (if function is activated, see page 64)if
somebody leaves a brief message.
This message is played back in the same
manner as the playback of an answering
machine message.
1. Press the »Menu« key to select the »ANS.
Machine« entry with
2. Press »Select«.
3. Select »Message« and confirm with »Se-
lect«.
4. Find »Memo«. The recording will be star-
ted by pressing »Select«.
80 English
.
.
.

3-1) Switch answering machine (TAM) on

1. Press the »Menu« key and select the
»ANS. Machine« entry with
2. Press »Select«.
3. Select »TAM setting« and confirm with
»Select«.
4. Select »TAM On/Off« and confirm with
»Select«.
5. Use to switch the function on/off and
confirm with »Select«.
3-2) Set answering machine language
1. Press the »Menu« key and select the
»ANS. Machine« entry with
2. Press »Select«.
3. Select »TAM setting« and confirm with
»Select«.
4. Select »TAM language« and confirm with
»Select«.
5. Use to select the desired language
and confirm with »Select«.

3-3-1) Set the number of rings for TAM

You can specify after how many rings the
TAM will be activated.
1. Press the »Menu« key and select the
»ANS. Machine« entry with
2. Press »Select«.
3. Select »TAM setting« and confirm with
»Select«.
4. Select "Set Ring" and confirm with »Se-
lect«.
5. By using the
and confirm with »Select«.
.
.
.
you can select 1 to 6 rings