Settings; Switching The Flashing Light On/Off; Setting The Call Signal Volume; Tone/Pulse Dialing - HumanTechnik flashtel eco Mode D'emploi

Settings

Switching the flashing light on/off

The telephone's visual call display (flashing light) can be switched on or
off by means of a slide switch on the back of the telephone.

Setting the call signal volume

The telephone's ringer volume can be set by means of a slide switch on the
back of the telephone.

Tone/pulse dialing

You can select the dialing process by means of a slide switch on the back
of the telephone.
Note: Most telephone lines operate with tone dialing.

Additional ports

Headset port

Standard headset port with a 2.5 mm jack (for connecting a PL-100/ PL-200,
for example).

Headphone port

Output for connecting headphones, an induction loop or such like.
English 25