Three Way Conference Call; Caller Id During Call Waiting; Answering Machine (Mu); Record Message - HumanTechnik Scalla3 combo Mode D'emploi

5. If desired, a conversation with the dialed
user can take place. You can also hang
up before the user picks up. In this case
the call will be directly re-directed.
6. Press the key to end the call, the cal-
ler in the waiting loop will now be transfer-
red automatically to the other caller.
If you want to cancel the transfer, press
the key again and now you can talk
again to the external caller.
The call will be transferred back if the dialed
mobile units does not answer within a cer-
tain time.

Three way conference call

You can establish a three way conference
call if you conduct an external call and an
intercom situation is present:
1. Press the key
during a call. The external caller will be
put into a waiting loop.
2. Enter the desired mobile number bet-
ween 1 and 5.
3. The dialed mobile unit will ring. The name
of the dialing mobile unit will be shown on
the display.
4. Receive the call with
5. The caller can now press the
the three way conference call.

Caller ID during call waiting

If your local phone company offers a call
waiting service, the the display shows the
name and/or the phone number of the se-
cond caller while you conduct a call with a
different caller.
Press the menu key left "R" to receive the
second caller. The first caller will be put into
the waiting loop.
Press "R" again to re-connect to the first call.
at the mobile unit
.
to start

Answering machine (MU)

The phone is equipped with an answering
machine.
It can be controlled from the base station or
the mobile unit.
The following describes the control from the
mobile unit (MU).
1) Announcement
You should record an announcement before
using the answering machine.
1-1) Record announcement
For best results, speak in the direction of the
microphone during recording.
1. Press the »Menu« key and select the
»ANS. Machine« entry with
2. Press »Select«.
3. Select "Announce" and confirm with »Se-
lect«.
4. Find "Answer Only" and confirm with »Se-
lect«.
5. Select »Record MESS« and confirm with
»Select«. The display shows »Record
MESS«. Speak your message loud and
clearly into the unit and end the recording
with »Select«.
The recording stops automatically if you
speak longer than 3 minutes.
1-2) Playback announcement
1. Press the »Menu« key and select the
»ANS. Machine« entry with
2. Press »Select«.
3. Select »Announce« and confirm with
»Select«.
4. Find »Answer Only« and confirm with
»Select«.
5. Select »Playback« and confirm with »Se-
lect«. The recording will be played back.
.
.
English 79