Settings - Call Signaling; Switching Call Signal On/Off - HumanTechnik Flashtel Comfort II Mode D'emploi

Settings – Call signaling
Switching the flash on/off
You can also have incoming calls signaled by a flashing light. The flashing
light appears on the back of the telephone.
P
1. Press
2. Then enter one of the two following codes:
a. Code "40" to switch the flash off.
b. Code "41" to switch the flash on;
the flash symbol will appear in the telephone display.
P
3. Press to store the settings.
4. Enter another code or press
Note:
The flash will not work during a power failure!
Switching the call signal on/off
P
1. Press
2. Enter one of the following two codes:
a. Code "20" switches the call signal off.
b. Code "21" switches the call signal on.
P
3. Press
4. Enter another code or press
42 English
#
and then
#
and then
to store the settings.
to quit the settings menu.
P
to quit the settings menu.
P