Delete Outgoing Message; Set The Number Of Rings For Tam; Remote Query Security Id For Tam Setup; Slower Playback Of Recorded Messages - HumanTechnik Scalla3 combo Mode D'emploi

2. Select »TAM setup« and confirm with
»Select« by using the
3. Select "Outgoing Msg" and confirm with
»Select«.
4. Select "Change OGM" and chose bet-
ween "Default OGM" and »Recorded
OGM«. Confirm with »Select«.

2-4) Delete outgoing message

1. Press the »Menu« key to get to the setup
menu.
2. Select »TAM setup« and confirm with
»Select« by using the
3. Select "Outgoing Msg" and confirm with
»Select«.
4. Select "Erase OGM" and confirm with
»Select«. The message text will be
erased immediately.

3-1) Set the number of rings for TAM

You can specify after how many rings the
TAM will be activated.
1. Press the »Menu« key to get to the setup
menu.
2. Select »TAM setup« and confirm with
»Select« by using the
3. Select "Ring Number" and confirm with
»Select«.
4. By using the keys you can select 1 to
6 rings and confirm with »Select«.
3-2) Save toll during remote inquiry with
the TAM.
In toll saver mode, incoming calls will be
answered after 5 rings until the first new
message was recorded. After this, the
answering machine answers already after
3 rings.
This is advantageous if you try to start a re-
mote inquiry. If the answering machine does
not answer after the 4th ring, then no mes-
sage was recorded and you can hang up
before you must pay for the call.
If the answering machine answers after 3
keys. rings, then a new message was recorded.
1. Press the »Menu« key to get to the setup
2. Select »TAM setup« and confirm with
3. Select "Ring Number" and confirm with
4. Select "Toll saver" with the

4) Remote query security ID for TAM setup.

keys.
A confidential four digit security ID is requi-
red to access your messages from an exter-
nal phone. The default security ID is "0000".
To ensure your privacy it is recommended to
change this security ID.
1. Press the »Menu« key to get to the setup
2. Select »TAM setup« and confirm with
3. Select "Security ID" and confirm with
4. Enter the new security ID now and press
keys.

5) Slower playback of recorded messages

In order to understand recorded messages
better, they can be played back at a slower
rate.
1. Press the »Menu« key to get to the setup
2. Select »TAM setup« and confirm with
3. Select »ICM voice slow« and confirm with
4. By using the
menu.
»Select« by using the
»Select«.
confirm with »Select«.
menu.
»Select« by using the
»Select«.
»Save«.
menu.
»Select« by using the
»Select«.
keys you can select bet-
ween ON and OFF and confirm with »Se-
lect«.
keys.
keys and
keys.
keys.
English 65