Delete A Call From The Caller Id List; Erase All Calls From The Caller Id List; Modifying The Base Settings With The Mobile Unit (Mu); Unregister Mobile Unit (Mt) From Base - HumanTechnik Scalla3 combo Mode D'emploi

Delete a call from the caller ID list

1. Press the »Menu« key and select the
»CID Book« entry with
2. The keys are used to browse in the
CID book to the desired entry.
3. Press »More« and select "Erase" with
»Select«. This means that the number is
erased.

Erase all calls from the caller ID list

1. Press the »Menu« key and select the
»CID Book« entry with
2. The keys are used to browse in the
CID book up to the desired entry.
3. Press »More« and select »Delete all«
with »Select«. This means that the num-
ber is erased.
Modifying the base settings
with the mobile unit (MU)
It is possible to modify several settings on
the base station through the mobile unit.
1) Unregister mobile unit (MU) from Base
You can unregister a mobile unit from a
Base registration.
1. Press the »Menu« key and select the »BS
Settings« entry with
2. Press »Select«.
3. Use the to browse to »Delete HS« and
press »Select«
4. Enter the PIN and press »Select«.
5. Select the mobile unit that must be dele-
ted from the Base and confirm with »Se-
lect«.
Note: The MU that you used to unregister
cannot be deleted.
74 English
.
.
.
2) Set the dialing mode of the base
1. Press the »Menu« key and select the »BS
Settings« entry with
2. Press »Select«.
3. Use the to browse to "Dialing Mode"
and press »Select«.
4. Select between »Tone« and »Pulse« and
complete the process with »Select«.

3) Set the call back time

1. Press the »Menu« key and select the »BS
Settings« entry with
2. Press »Select«.
3. Select "Set Flash" and confirm with »Se-
lect«.
4. Use , to choose between 100ms, 300ms
and 600ms and confirm with »Select«.

4) Change PIN code

For security reasons, the PIN code will be
requested for some functions before the
command is executed.
Please follow the instructions to change the
PIN code:
1. Press the »Menu« key and select the »BS
Settings« entry with
2. Press »Select«.
3. Select the first contact by using the
keys.
4. Press »Select«.
5. Enter the old PIN and press »Select«.
6. If you entered the correct PIN, then you
will be asked to enter the new four digit
PIN and press »Select«.
7. Enter the new PIN again for confirmation
and complete the process with »Select«.
.
.
.