Sos Functions (Bs); Program Sos Number; Program Sos Text; Replay Sos Text - HumanTechnik Scalla3 combo Mode D'emploi

SOS functions (BS)

This part of the instructions covers the SOS
functions of the base station.
This phone is equipped with an SOS func-
tion. An alarm will be triggered and the
emergency call starts when pressing the
SOS key. Up to 5 numbers can be stored.
These number will be called up to a maxi-
mum of 3 times or until a recipient accepts
the call. You can record your own text, which
will then be played.
The emergency call will be interrupted with
the STOP key.

Program SOS number

1. Press the »Menu« key to get to the setup
menu.
2. Select »Set SOS« and confirm with »Se-
lect« by using the
3. Select "SOS NUMBER" and confirm with
»Select«.
4. Select an "SOS NUMBER" 1 to 5 with the
keys and confirm with »Select«.
5. Enter the new phone number now and
press »Save«.
Repeat this process until all required num-
bers have been stored.

Program SOS text

1. Press the »Menu« key to get to the setup
menu.
2. Select »Set SOS« and confirm with »Se-
lect« by using the
3. Select "SOS text" and confirm with »Se-
lect«.
4. Select "RECORD SOUND" and confirm
with »Select«. The recording starts ...
5. Speak your text now slowly, loudly and
clearly into the microphone. Select »End«
to complete the recording.
keys.
keys.

Replay SOS text

1. Press the »Menu« key to get to the setup
menu.
2. Select »Set SOS« and confirm with »Se-
lect« by using the
3. Select "SOS text" and confirm with »Se-
lect«.
4. Select "PLAY SOUND" and confirm with
»Select«. The recording will be played
back.

Erase SOS text

1. Press the »Menu« key to get to the setup
menu.
2. Select »Set SOS« and confirm with »Se-
lect« by using the
3. Select "SOS text" and confirm with »Se-
lect«.
4. Select "Erase" and confirm with »Select«.
The recording will be erased.

Switch SOS on automatically

If you have activated this function and defi-
ned the security ID, then the following func-
tion is available:
After 10 ring tones the phone answers auto-
matically. (In this situation, the user can hear
the caller, but he/she cannot answer). The
caller hears a beep which represents the
request to enter the security ID. Afterwards,
the hands-free function is activated. The
caller hears a tone every 2 minutes. She/he
must now press a key to continue the call,
otherwise the call will be disconnected. If the
function "disconnect automatically" is activa-
ted, then the user must press the hands-free
key and the hands-free function is switched
on while the security ID must not be entered.
1. Press the »Menu« key to get to the setup
menu.
2. Select »Set SOS« and confirm with »Se-
lect« by using the
keys.
keys.
keys.
English 67