Key To Warning And Instructions Labels - Mondolfo Ferro MT2450 Manuel D'utilisation

WARNING
Do not remove or deface the Safety, Danger or Instruction decals. Replace any
missing or illegible Safety, Danger or Instruction decals. Replacement decals can
be obtained from your nearest dealer.
- When using and carrying out maintenance on the machine, observe the unified
industrial accident prevention regulations for high voltage industrial equipment and
rotating machinery.
- Any unauthorised alterations made to the machine automatically release the
manufacturer from any liability in the case of damage or accidents as a result of such
alterations. Specifically, tampering with or removing the machine's safety devices is a
breach of the regulations for industrial accident prevention.
WARNING
During work and maintenance operations, always tie up long hair and do not wear
loose clothing, ties, necklaces, wristwatches or any other items that may get caught
up in the moving parts.

Key to warning and instructions labels

Never apply force to the spin shaft when moving the machine.
Keep hands well away from the points shown to avoid crushing during
wheel raising and lowering operations.
Wheel lifting operations must be carried out with the greatest care. To
avoid the risk of the wheel tipping over, it should be held with one hand
when the carriage is in motion.
Unplug the power supply cable before carrying out maintenance/
assistance work on the machine.
Do not lift up the guard when the wheel is turning.
MT 2450 operator's manual
GB
57