Publicité
Les langues disponibles
Les langues disponibles
Changing the cook control* battery
The cook control battery is a CR2032 button battery.
If the symbol
battery.
The battery life depends on how often the cook control is used.
The cook control battery contains Dimethoxyethane no. CAS
110-71 - 4. It is in accordance with the European regulations.
For your safety and environmental protection: do not open the
battery, do not expose it to high temperatures, do not throw it
away with household waste; Dispose of battery at a battery
disposal point.
Non-rechargeable batteries should not be recharged.
Different types of batteries or new and used batteries should not be mixed.
Batteries must be inserted according to the correct polarity.
Used batteries must be removed from the pressure cooker and disposed of
correctly.
If the pressure cooker is to be stored without being used for a long period,
you are advised to remove the batteries.
The power supply terminals must not be short circuited.
Proceed to a flat work surface.
To remove the battery from your cook control, place the
cook control on a flat work surface. Open the battery cover
with a coin, turning it anti-clockwise so that the ½ moon
on the cover aligns with the ½ moon on the cook control
(see illustration opposite).
Replace the battery.
Replace the battery sealing ring in its casing.
To refit the battery cover, position the ½ moon
battery cover facing the ½ moon
Gently turn the battery cover clockwise, while pressing lightly,
to align the ½ moon
moon on the cook control ● (see illustration opposite)
Do not force the battery cover when you close it. Do not turn
beyond the stops.
If you lose your cook control, you can purchase another from
any of our TEFAL/T-FAL Approved Service Centres.
appears, or if you no longer have a display, change the
of the battery cover with the full
of the
of the cook control.
+
Publicité
