Publicité
Les langues disponibles
Les langues disponibles
To clean the operating valve (A):
Remove the operating valve (A)
Clean the operating valve (A) under cold tap water
- Fig.
15.
Check its mobility: see figure opposite.
To clean the steam release outlet (B) located on the lid:
Remove the valve (A)
Check to make sure the steam release outlet is clear of debris and round
Fig.
13. If needed, clean it with a tooth pick
To clean the safety valve (E):
Clean the part of the safety valve located inside the lid by washing under
water.
Check its proper functioning by pressing firmly on the bearing* (using a
cotton bud, with the cotton wool tip removed), which must be mobile
17
or by pressing the piston* several times with your finger (it must be
- fig
17a. Refer to the section "Compulsory checks before each use".
mobile)
To clean the cook control* (F):
Use a clean dry cloth.
Do not use any solvents.
Never place the cook control in water, nor in the dishwasher.
Maintenance
To change your pressure cooker's gasket:
Change your pressure cooker's gasket every year or if split or damaged.
Always use an original TEFAL/T-FAL gasket corresponding to your model (see
section "Accessories")
To replace the gasket, refer to
inserted beneath each of the grooves on the lid.
To store your pressure cooker:
Turn the lid over and store it upside down on the pan.
The pressure cooker's opening and closing system does not require any
specific maintenance apart from cleaning.
- Fig. 11
- Fig. 11
- Fig 14
- Fig. 16
and ensure that the gasket is properly
and rinse it.
-
- fig
Publicité
