Medela Symphony Mode D'emploi page 26

7. Expression
Note
26
l Always disconnect the Symphony from
the power source after expression.
Info
l The program stores the last vacuum
setting in the stimulation phase.
l For the Standard program:
Press the "Let-down" button
revert from the expression phase to the
stimulation phase if necessary. If milk has
not begun to flow after two successive
stimulation phases, you should take a
break and try again in 15–30 minutes.
Also, you could try breast massage and
then pump using the expression phase.
l If the pump has been running for
30 minutes without any manipulations
(e.g. adjustment of the vacuum), the
Symphony will automatically switch off.
7.2 Symphony Standard card:
to
Press the On/off button
on the breast pump. The Standard
program will automatically start with
the stimulation phase after pressing
the On/off button.
Set the comfort vacuum for the
expression phase (see chapter 7.3).
The bars on the display show the
vacuum level. The more bars, the
stronger the vacuum.
Operation
1
4
to switch