Medela Symphony Mode D'emploi page 15

5.2 Before first use / after each use
1 1
Disassemble the pump set into
its individual parts:
– bottle
– multi lid
– breast shield
– connector and connector lid
– membrane
Check all parts for damage.
Replace damaged or worn parts.
2b
Dishwasher
As an alternative to the previous
step 2a, you can also clean the
pump set in the dishwasher. Place all
parts on the top rack or in the cutlery
section. Use a commercially available
dishwashing detergent.
2a
l Rinse all parts with cold, clear drinking-
quality water (approx. 20 °C).
l Clean these parts with plenty of warm,
soapy water (approx. 30 °C). Use a
commercially available washing-up liquid,
preferably without artificial fragrances
and colouring (pH neutral).
l Rinse the parts with cold, clear drinking-
quality water (approx. 20 °C).
3
Drying / storage
Dry with a clean cloth or leave to dry
on a clean cloth.
Put the clean parts in a clean storage
bag or a clean environment. Do not store
parts in an airtight container/bag. It is
important that all residual moisture dries.
15