6. Preparing for pumping
Warning
18
For chapter 6.2 Mains operation:
l Use only the power cord that comes with
the Symphony breast pump.
l Make sure the voltage of the power cord
is compatible with the power source.
Info
l Use the pump only with the appropriate
program card (Symphony Standard or
Symphony PLUS).
Optional for pump with battery:
l The built-in battery must be charged
for 12 hours on receipt of the device.
l The pump can be used during charging.
l If the pump is to remain unused for
a long time, charge the battery every
two months (for 12 hours each time).
l The optimum service life of the battery
is ensured if it is not fully discharged
on a regular basis or if the pump is
charged while not in use.
Pumping time
(fully-charged battery)
Charging time
(for full charge)
approx. 60 min.
12 hours
6.1 Card and cord protector
1
To remove, unscrew the card
and cord protector and slide
it out of the guide rail.
6.2 Mains operation
1
Insert the power cord into the
power socket on the back of
the pump.