Publicité
Les langues disponibles
Les langues disponibles
6. Remove the scissors from the sharpening
station and turn the scissors to sharpen the
other blade.
7. Insert the other scissor blade into the
grinding slot.
8. Using light pressure guide the blade from
the screw up to the tip along the grinding
wheel
.
[
10 ]
9. Execute the alternating grinding process
until the cutting edges are burr-free and
sharp.
10. Switch the device off and wait for the
grinding wheel
10 ]
[
Changing the grinding wheel
NOTE
Information on replacement:
Never operate the device without
u
protective equipment.
Ensure that the grinding wheel
u
dimensions match those of the device.
Never use separate bushings or adapters
u
in order to make grinding wheels whose
hole is too large fit the device.
Do not use any saw blades.
u
Always reassemble the device completely
u
after replacing the grinding wheel.
m
CAUTION!
Switch the device off and remove the
mains plug.
Allow the device to cool down.
NOTE
When the grinding wheel nut
u
tightened or loosened, the grinding
wheel
must be held firm by hand or
10 ]
[
the axle held firmly in place with a pair
of pliers.
1. Release the grinding wheel nut
clockwise direction (left-handed thread).
2. Remove the grinding wheel
3. Set up a new grinding wheel
grinding wheel nut
direction (left-handed thread).
32 GB/IE
to stop.
is being
16 ]
[
in the
16 ]
[
.
10 ]
[
. Screw the
10 ]
[
in the anti- clockwise
16 ]
[
4. Test run: Before starting work and after
each change of grinding disk, carry out a
test run of at least 60 seconds with no load.
Switch off the equipment immediately if the
disk runs lumpy, substantial vibrations occur,
or abnormal noises are generated.
Replacement parts/accessories
Compatible replacement parts for
this product can be purchased at
www.Optimex-Shop.com.
Please have the order number ready for
your order. Orders can only be placed and
processed online.
Part
Grinding Wheel
10 ]
[
If you are not sure where you can purchase
compatible parts, please contact the Lidl
Service Hotline (see „Service").
Order number
943516401
Publicité
