Publicité
Les langues disponibles
Les langues disponibles
−
if the connection line is damaged or
entangled,
−
in case of unusual sounds.
Only use grinding wheel from original
supplier.
˜ Residual risks
Even if properly operating and handling this
electric tool, some residual risks will remain. Due
to its construction and build, this electric tool
may present the following hazards:
Lung damage, if suitable respiratory
protection is not worn.
Hearing damage, if suitable ear protection
is not worn.
Damages to health due to
−
touching the area of the grinding tool
which was not covered;
−
the ejection of pieces from workpiece or
damaged grinding wheels.
Damage to your health caused by swinging
your hands and arms when operating the
appliance for longer periods of time or
if the unit is not held or maintained properly.
m
WARNING!
Warning! During operation, this electric
u
tool generates an electro- magnetic field
which, under certain circumstances,
may impair the functionality of active
or passive medical implants. To reduce
the risk of serious or lethal injuries, we
recommend that persons with medical
implants consult their doctor and the
manufacturer of their medical implant
before operating the machine.
˜ Assembly
m
CAUTION! RISK OF INJURY!
Ensure that you have sufficient space
u
in which to work, and that you do not
endanger other people.
All covers and protective devices
u
must be assembled properly before
commissioning.
Disconnect the mains plug before
u
changing the setting on the device.
Setting up
Place the sharpening station on firm surface and
fasten the device. Ideally, bolt the drill to the
surface. Use the mounting holes for the work
bench assembly
A ]
[
9 ]
[
NOTE
The screws and nuts required for
u
assembly are not part of the scope of
delivery.
Mount the sharpener
1. Select one of the three sharpeners.
2. In order to remove a sharpener from the
working position, you must press down the
release lever for the sharpener
3. Remove the sharpener from the guide rails,
upwards.
4. In the storage positions, the sharpeners are
not fixed to the right and left side and can
be easily removed from the guide rails.
5. In order to fasten the selected sharpener
in the working position, from above push
this into the guide rails. Press the sharpener
down until it snaps into place.
m
CAUTION!
The sharpeners also present a
u
safety device. Never use this
device without a sharpener. Risk
of injury!
in the baseplate for this.
.
A ]
[
13 ]
[
GB/IE
29
Publicité
