ULTIMATE SPEED ULGD 10 A1 Traduction Du Mode D'emploi D'origine page 7

Table of pictograms used
Suitable for the charging
of 12-V batteries
Direct current
12 V mode
12V
(Program 1, 2, 3, 4 and 9)
Disconnect from the mains
before closing or opening
any of the connections to
the battery.
Connect the battery
first, then establish the
connection with the mains!
Avoid flames and sparks!
Winter – AGM – Mode
(Program 2, 4, 6 and 8)
VEHICLE BATTERY CHARGER
ULGD 10 A1
z Introduction
Congratulations! You have pur-
chased one of our high-quality
products. Please familiarise yourself
with the product before using it for
the first time. To do so, please read
through the following operating and
safety instructions carefully.
KEEP OUT OF THE REACH OF
CHILDREN!
Suitable for the charging
24 V
of 24-V batteries
Protection class II
24 V mode
24V
(Program 5, 6, 7, 8 and 10)
Ensure sufficient
ventilation when
charging!
Protect electrical
connections from rain!
Do not smoke!
Supply program
(Program 9 and 10)
z Intended use
The Ultimate Speed ULGD 10 A1 is
a multi-level vehicle battery charger,
which is suitable for charging and
trickle charging 12 V- (6 cells) or 24
V (2x6 cells) lead acid batteries with
electrolyte solution (WET), with elec-
trolyte absorbing mats (AGM), with
gel-type electrolyte (GEL) or calcium
batteries. The device is not suitable
for charging lithium-ion batteries!
You can also regenerate discharged
batteries (depending on the battery
type). The vehicle battery charger
GB/IE/NI/CY/MT
7