ULTIMATE SPEED ULGD 10 A1 Traduction Du Mode D'emploi D'origine page 19

Program 2
12V
1
(14.7 V / 5.0 A)
To charge 12 V batteries with a
capacity of 20 Ah to 100 Ah under
cold conditions or to charge AGM
batteries.
Press the program selector button
twice to select Program 2.
The
12V ,
3
1
symbols are shown on the display.
During the charging process, the
charging display
progress of the charging process
(1-4 bars) will be shown on the
status display
10
is fully charged, the status display
shows
4 bars. The flashing stops
10
and the device switches to trickle
charging automatically.
The display will show "FUL".
Program 3
12V
2
(14.4 V / 10.0 A)
To charge 12 V batteries with a
capacity of 60 Ah to 200 Ah. To
maintain the charge of 12 V batter-
ies up to 300 Ah.
Press the program selector button
three times to select Program 3.
and
4 6
flashes. The
9
. When the battery
The
12V
3
are shown on the display. During
the charging process, the charging
display
9
the charging process (1-4 bars) will
be shown on the status display
When the battery is fully charged,
the status display shows
The flashing stops and the device
switches to trickle charging automat-
8
ically. The display will show "FUL".
Program 4
12V
2
(14.7 V / 10.0 A)
To charge 12 V batteries with a
capacity of 60 Ah to 200 Ah under
cold conditions or to charge AGM
batteries. To maintain the charge of
12 V batteries up to 300 Ah.
Press the program selector button
four times to select Program 4.
The
12V
3
symbols are shown on the display.
During the charging process, the
charging display
progress of the charging process
(1-4 bars) will be shown on the
status display
is fully charged, the status display
shows 4 bars. The flashing stops
10
and the device switches to trickle
8
charging automatically.
The display will show "FUL".
and symbols
5
2
flashes. The progress of
10
and
,
5
2
flashes. The
9
. When the battery
10
GB/IE/NI/CY/MT
.
10
4 bars.
8
6
19