Publicité
INFORMATION TO THE USERS
the suitable separate waste collection centres of electronic and electro-technical
wastes, or to give it back to the seller or dealer when buying a new equipment of
equivalent type, in terms of one to one. The suitable separate waste collection for
the following sending of the disused equipment to recycling, the dealing or handling
and compatible environment disposal contributes to avoid possible negative effects
on the environment and on the people's health and helps the recycling of the mate-
rials the machine is composed of. The user's illegal disposal of the product implies
the application of administrative fines as stated in Law Decree n.22/1997" (article 50
and followings of the Law Decree n.22/1997).
PREPARATION BY THE PURCHASER
•
Preparation of the installation site.
The purchaser must prepare the surface on which the machine will stand suitable
to support the machine weight (see the installation chapter).
•
Electrical requirements.
The mains power installation must comply with the safely regulations and stand-
ards in force in the country of installation and must include an efficient earth sys-
tem. An omnipolar cut-off device must be installed on the power line upstream of
the machine.
•
Should you decide to stop using this type of unit, we
suggest you render it inoperable by unplugging it
and cutting the power supply cord.
•
Never dispose of the machine in the environment:
to dispose of the machine, contact an authorized
center or contact the manufacturer for pertinent in-
dications.
Under the senses of the Directives 2011/65/EU, 2012/19/
EU and 2015/863/EU, concerning the reduction of the
use of dangerous substances in electric and electronic
equipment, as well as the disposal of wastes.
The symbol of the crossed large rubbish container that
is present on the machine points out that the product
at the end of its life cycle must be collected separate-
ly from the other wastes. The user for this reason will
have to give the equipment that got to its life cycle to
13
Publicité
