Stryker Universal Base Skull Mode D'emploi page 18

5. Reprocessing
This section contains only product-specific information. For general reprocessing
instructions, safety directives, and reprocessing equipment, refer to the Guide for
Cleaning, Disinfection, and Steam-Based Sterilization (GCDS) (TD6000005750).
The cleaning group of this product according to the GCDS is: IV.
Disassemble the device entirely before reprocessing. Refer to Figure 2 for a picture of the
device in disassembled state.
This device can be reprocessed in the Passive Trackers Insert Tray
(REF 8000-810-000). Refer to the tray instructions for use for handling of the tray
and placement of the instruments.
16/54 | Reprocessing EN