Mission Critical Xantrex XanbusSCP Guide Du Propriétaire page 47

ViewingIndividualFaultMessagesfrom the
FaultLog
On the fault log, you can also select an individual fault and view its
details.
To view details for a fault:
1. Use the up arrow or down arrow button to highlight the fault
message you want to view.
2. Press Enter.
The complete fault message appears.
To return to the fault log:
Press Exit (as indicated by the arrow marked "cancel").
n
To proceed to the device menu and reconfigure the device
to eliminate the fault condition:
Press Enter (as indicated by the arrow marked
n
"continue").
On the device menu, you can also attempt to clear the fault by
selecting Clear Faults/Warnings.
975-1171-01-01
Viewing Multiple Fault Messages
If several faults occur before you can acknowledge or clear them,
the SCP displays the accumulated messages on a fault list. The
fault list displays messages from all network-enabled devices, not
just the SCP. You can select a message and view complete
information for it from the fault list.
To view a message from the fault list:
1. On the fault list, use the up arrow or down arrow button to
highlight the fault message you want to view.
2. Press Enter.
The complete fault message appears.
3. To return to the fault list, press Exit.
Or
To return to the SCP menu, press Enter.
Each time you return to the fault list after viewing a complete
message, the message you viewed is removed from the list.
You can also view the fault list at any time.
To view the fault list at any time:
1. On the Select Device menu, use the up arrow or down
arrow button to highlight System Settings.
2. Press Enter.
3. On the System Settings menu, use the down arrow button
to highlight View Fault List.
4. Press Enter.
47