Mission Critical Xantrex XanbusSCP Guide Du Propriétaire page 28

Identifying Changeable Settings
A device Setup menu displays changeable settings and
commands to view other menus. Changeable settings are
enclosed in square brackets.
To select and adjust a setting:
1. On the device Setup menu, press the up arrow or down
arrow button to highlight the setting you want to change.
2. Press Enter to highlight the current value of that
changeable setting.
The previously set value appears with an asterisk (*) beside
it.
XW6848 00: Setup
Meters
[Enabled]
Inverter
[Disabled]
Search Mode
[Disabled]
Grid Support
Figure 16 Setup Menu
28
XW6848 00: Setup
Meters
[ Enabled]
Inverter
*
[Disabled]
Search Mode
[Disabled]
Grid Support
Figure 17 Setup Menu Values
3. Press the up arrow or the down arrow button to change the
value. Hold down the button to scroll through a large range
of values quickly.
4. Press Enter to select the value or Exit to cancel the value
selection.
5. If you have another setting to change, return to step 1.
Or
If you have no more settings to change, press Exit twice to
return to the System Home screen.
Xanbus System Control Panel (SCP) Owner's Guide