Mission Critical Xantrex XanbusSCP Guide Du Propriétaire page 25

Inverter/Charger Home Screen
The invert/charger Home screen is the first of the device home
screens. Each device installed in the system (except the SCP)
has its own Home screen.
To view additional device Home screens, press the down
arrow button.
The inverter/charger Home screen displays status information for
the inverter/charger (Standby, Inverting, Charging, AC Bypass,
Search, or Equalize). For more information, see the
inverter/charger's Owner's Guide.
To display the inverter/charger Home screen:
From the System Status screen, press the down arrow
n
key.
XW6848 00:Home
Status
-26.4A
Battery
Load
0.0V
AC1
setup
Figure 14 Home Screen
975-1171-01-01
Invert
51.9V
1250W
0W
system
Displaying Device Menus
This section describes the device and setup menus on the SCP.
Select Device Menu
The Select Device menu displays a list of Xanbus-enabled
devices in the system, including the Schneider Electric Conext
XW Pro and the SCP. The Select Device menu is where you
can access the setup menus for each device in the system. The
length of the Select Device menu depends on how many
Xanbus-enabled devices are installed.
The Select Device menu also contains the Clock menu (where
the time and date are set) and the System Settings menu
(where system-level settings can be configured). The System
Settings, Xanbus SCP, and Clock menus are always available
from the Select Device menu, regardless of the number of
Xanbus-enabled devices installed.
To display the Select Device menu:
From the System Status screen, press Enter.
n
Displaying Device Menus
25