Publicité
Les langues disponibles
Les langues disponibles
Viewing Multiple Warning Messages
If several warning messages occur before you can acknowledge
or clear them, they are displayed together on a warning list. The
warning list contains messages from every Xanbus-enabled
device, not just the SCP. You can select a message from the
warning list and view its details.
To view a message from the warning list:
1. On the warning list, use the up arrow or down arrow button
to highlight the warning message you want to view.
2. Press Enter.
The complete warning message appears.
After viewing the warning message, you can return to the warning
list by pressing Exit or continue to the menu for the device that
caused the warning by pressing Enter. Each time you return to the
warning list after viewing a complete message, the viewed
message is removed from the list.
If you have left the warning list, you can view it at any time from
the System Settings menu.
To view the warning list:
1. On the Select Device menu, highlight System Settings
and press Enter.
2. On the System Settings menu, highlight View Warning
List and press Enter.
44
Viewing the SCP Warning Log
The SCP warning log displays the 20 most recent warnings that
the SCP generated. These warnings can be both active and
cleared. Each warning in the log is identified by a warning code
and the time that it occurred. You may need to refer to the warning
log before consulting Chapter 5, "Troubleshooting", or before you
call technical support.
To view the warning log:
1. On the SCP menu, press the down arrow button to highlight
View Warning Log.
2. Press Enter.
To return to the SCP menu:
From the Warning log, press Exit.
n
Warning Log:SCP
250 May/13 10:58PM
252 May/10 10:15AM
250 Apr/30 4:06PM
250 Apr/28 12:00PM
Figure 20 SCP Warning Log
Xanbus System Control Panel (SCP) Owner's Guide
Publicité
