Mission Critical Xantrex XanbusSCP Guide Du Propriétaire page 24

System Status Screen
The System Status screen appears after the Startup screen
and displays aggregated status information for the entire power
system.
The System Status screen displays:
Qualified AC source (if applicable) and total power to and
n
from the source.
Battery voltage and capacity level.
n
Net battery input or output current.
n
Total inverter loading.
n
Time and date.
n
System Status
20.4A
Battery
BatLev
Load
115V
AC1
menu
9:18AM
Figure 13 System Status Screen
A typical system may have up to three Schneider Electric
Conext XW Pro inverter/chargers, two MPPT solar charge
controllers, one Xanbus AGS and one Xanbus SCP connected to
a single battery bank, generator and a common utility grid.
24
53.9V
E--F
1235W
3202W
Mar 10
The System Status screen always features a "menu" arrow
pointing to the Enter button. Pressing Enter displays the Select
Device menu.
IMPORTANT:
If you are uncertain which SCP screen or menu you are viewing,
you can always return to the starting point by pressing Exit until
the System Status screen appears.
Xanbus System Control Panel (SCP) Owner's Guide