Mission Critical Xantrex XanbusSCP Guide Du Propriétaire page 45

Viewing Individual Warning Messages from
the Warning Log
On the warning log, you can also select an individual warning and
view its details.
To view details for a warning:
1. Use the up arrow or down arrow button to highlight the warning
message you want to view.
2. Press Enter.
The complete message appears.
To return to the warning log:
Press Exit (as indicated by the arrow marked cancel).
n
To proceed to the device menu and adjust device settings to
eliminate the warning condition:
Press Enter (as indicated by the arrow marked continue).
n
975-1171-01-01
Fault Messages
Fault messages appear when the SCP's operation is affected by a
condition that requires immediate attention. When a fault occurs,
the SCP stops operating until either the fault condition goes away
or until you manually clear the fault and take action to eliminate
the fault condition.
Fault: F504
System Panel
Network not available.
Check connection,
clear fault.
continue
Figure 21 SCP Fault Message
cancel
45