Publicité
Les langues disponibles
Les langues disponibles
About This Guide
About This Guide
Purpose
The purpose of this Guide is to provide explanations and
procedures for installing and operating the Xanbus System
Control Panel (SCP).
Scope
The Guide provides safety guidelines, setup information, and
procedures for installing and configuring the SCP. This Guide
also includes information about operating and troubleshooting the
unit. This Guide does not contain guidelines for configuring every
Xanbus™-enabled device to which the SCP connects. See the
owner's guide or operation guide for each Xanbus-enabled device
for detailed configuration information.
Firmware Revision
Some SCP features and functions described in this manual may
be incompatible with later firmware revisions. To view the
firmware revision number of your product, see "Viewing Device
Information" on page 3–17.
4
Audience
The Guide is intended for anyone who needs to install and/or
operate the SCP. Installers should be certified technicians or
electricians.
Organization
This Guide is organized into five chapters and one appendix.
Chapter 1, "Introduction", introduces and describes features
n
of the SCP.
Chapter 2, "Installation", contains information and
n
procedures for installing the SCP.
Chapter 3, "Configuration", contains information and
n
procedures for configuring the SCPand using the SCPto
configure another device.
Chapter 4, "Operation", contains information and
n
procedures for operating the SCP.
Chapter 5, "Troubleshooting", contains reference tables of
n
warning and fault messages.
Appendix A, "Specifications", contains the electrical,
n
mechanical, and environmental specifications for the SCP.
Xanbus System Control Panel (SCP) Owner's Guide
Publicité
