■ Error Display Messages (CD/MD Player)
|
Display
Possible Cause
Problem
Probable Solution
CD
- El -
MD
- El -
• Disc dirty or wrong
side up
• Data MD or blank MD Disc is automati¬
cally ejected.
Check the disc.
CD
-E2-
MD
-E2-
Disc damaged
CD
- E3 -
MD
-E3-
Receiver fails to operate
for some cause.
Open control panel and press
CD
±
or MD ± button. If receiv¬
er still does not work, remove
control panel, press the reset
button on receiver, and place
control panel back on. If it still
fails to operate normally, ask
your dealer or nearest service
station for repair.
© PLS EJECT
c PLS EJECT
Attempt is made to start
CD or MD before eject
is over.
Open control panel and press
CD A or MD A button.
■ Error Display Message (CD Changer)
Display
Possible Cause
Problem
Probable Solution
Disc dirty or wrong side
up
Next disc is
automatically
selected.
Eject magazine and check the
disc.
Disc damaged
Receiver fails to operate
for some cause.
Press EJECT button on changer.
If trouble is unremedied, press
the reset button on changer,
trouble still persists, ask your
dealer or nearest service station
for repair.
No disc at all in maga¬
zine
Insert discs into magazine.
Note:
• A number before El or E2 indicates the number of an error disc.
• Display contents and operations vary in part from one changer to another {due to the differences in
changer specifications). For details, refer to the manual for the changer you are using.
CQ-MRX777EUC