Panasonic CQ-MRX777EUC Manuel D'utilisation page 30

Sound Controls
(Continued)
Adjusting the Tone Quality in the
Memory
Tone quality (GEQ curve characteristic) settings by GEQ adjustment
can be saved in the buttons 1 to 6. (Up to 6 patterns)
© Press SEL to change to the GEQ mode.
© Select a frequency and adjust the level to set the GEQ.
(See steps © and (D above.)
© Press and hold one of the preset buttons t to 6 until the display
blinks.
Note:
You can change the memory setting by repeating the above pro¬
cedure.
'•_
_
_
_
_
Recalling GEQ Memory
© Press SEL to change to the GEQ mode.
(I) Press one of the buttons (1 to 6) to recall the desired GEQ.
The preset GEQ curve is displayed.
Balance and Fader Adjustment
© Press SEL to change to BAL//FAD mode.
© Balance Adjustment
Press TRACKS or TRACK*** to shift the sound volume to the
right or left speakers.
Press < or > when using a remote control.
Fader Adjustment
Press VOLA or VOLV to shift the sound volume to the front or
rear speakers.
Press
A
or
V
when using a remote control.
28
CQ-MRX777EUC