Disc Player Basics
MD Mode
With no disc inserted
(Standby Indicator off)
© Press
OPEN
to open the front panel.
© Insert a disc with the label side up.
© Close the front panel by hand.
The power is automatically switched on to start playing the MD.
With a disc inserted
(Standby Indicator lights.)
Press
SOURCE
to change to MD.
Play starts from first track. The standby indicator blinks.
Press MD when using a remote control.
MD
-
\
Caution:
• Close the control panel after the MD is completely pulled in.
• Do not insert an MD into the CD slot to prevent any trouble.
v___
-.
Note:
No operation can be performed, except for MD eject, when the front panel is open,
v_!_'_)
Standby Indicator
Stopping and Ejecting a Disc
Open the front panel. (See page 11.) Press ±. to stop MD play, and
the disc will be quietly ejected from the MD slot.
Power is automatically switched off after the MD is ejected.
Caution:
• When the front panel is open, do not force it down and do not put anything on it because these may
result in damage to the unit.
• Do not adjust the front panel angle, or open/close the front panel, if a CD or MD has not been com¬
pletely inserted into, or removed from the CD or MD slot.
18
CQ-MRX777EUC