Panasonic CQ-MRX777EUC Manuel D'utilisation page 33

Setting a SBC-SW Type
Using Rear Speaker Exclusive to Subwoofer Output
The rear speaker (built-in amplifier) can be used as a subwoofer by
setting its cutoff frequency.
(In this case, the rear speakers will be in monaural mode.)
© Press SEL to select SBC mode.
© When "SBC-SW" is not displayed, press VOLV to change to
SBC-SW.
Press
V
when using a remote control. '
© Press TRACK^>- to change to the SBC-SW cut off frequency as
follows.
(Default: SBC-SW OFF)
SBC-SW OFF -► SBC-SW 100 Hz
SBC-SW 200 Hz SBC-SW 150 Hz
(TRACK-*^: opposite direction)
•X* Press > or < when using a remote control.
SBC-SW OFF: Set to this position when conventional speakers
are connected.
The tone is regular type, with no cutting off high
frequency.
CQ-MRX777EUC
31