Publicité
Les langues disponibles
Les langues disponibles
Pre-out (External Output) Setting
(Continued)
Pre-out Output Volume Adjustment
The SUB * W indicator blinks and lights when the setting is finished.
© Press SPC(SUB'W) to change to LEVEL SELECT.
(See page 33.)
(2) Press TRACK-^* or TRACKS to decrease or increase the vol¬
ume.
(Default: 0 dB)
Press > or < when using a remote control.
Adjusting range: -«> dB <—10 dB +-0 dB-+ +10 dB (at 2-dB intervals)
-«*» dB: No output from the amplifier connected to the
preout terminal (No sound is produced.)
Sub-woofer Output Relative Volume
Setting/Delay Time Adjustment
The bass volume arising from the difference between internal amplifier
output and Sub-woofer output generated depending on the car size
and the relative positions of the speakers can be adjusted through
delay time to increase the bass larger in volume than the other sound
ranges.
[Default: 0 ms, Adjusting range: -10 to +10 ms (1 ms each)]
Note: 1 ms = 0.001 second
© Press SPC(SUBW) in the preout setting mode to change to DELAY
SELECT. (See page 33.)
© Press TRACK^^ or
to increase or decrease the delay time.
(Default: 0 ms)
TRACK*^: When it is set to more than +1 ms , delay time
increases and Sub-woofer output comes later than
internal amplifier output.
TRACK-**: When it is set to less than -1 ms, delay time decreas¬
es and Sub-woofer output comes sooner than internal
amplifier output.
Press > or < when using a remote control.
The delay indicator and the ms indicator light when adjusting.
Setting Upper Limits of Sub-woofer
Output Frequency/Setting Cutoff
Frequency
Set upper limits of an output bass frequency (cutoff frequency) to suit
the Sub-woofers to be used.
© Press SPC(SUBW) in the preout setting mode to change to FREQ.
SELECT.(See page 33.)
34
CQ-MRX777EUC
Publicité
