Panasonic CQ-MRX777EUC Manuel D'utilisation page 37

(D Press TRACK** to change the frequency as follows.
{Default: FREQ. OFF)
OFF—► 100Hz -* 150Hz -* 200Hz
i _I
(TRACK-**: opposite direction)
Press > or < when using a remote control.
The Hz indicator lights when setting.
'• * ' >
Note: In case of using the cutoff frequency or phase difference adjustment function of an external
amplifier {available as an option), set the cutoff frequency of this CD/MD receiver to OFF and its delay
time to 0 ms.
^J
Setting THRU Output
The THRU indicator blinks during adjustment, and lights steadily when THRU output is set.
.. .
Note:
• THRU output is stereo and changes as the volume balance of the built-in amplifier is adjusted. (See
Fader, page 28.)
• In THRU output mode, POSITION and SBC/SBC-SW effects are invalid.
I_____
J
Selecting a THRU Output Setting
Item
© Press and hold SPC(SUBW) for more than 2 seconds to change
to PREOUT THRU mode.
(D Press VOL A to display "PREOUT THRU".
Press A when using a remote control.
© Press SPC(SUBW) to switch as follows.
LEVEL SELECT : Volume level adjustment
l
F/R SELECT : Fader interlocked
-
Note:
When a setting mode is selected but no operation is made within
5 seconds, the display will return to the regular operation mode.
v_____
J
CQ-MRX777EUC
35