Panasonic CQ-MRX777EUC Manuel D'utilisation page 29

Sound Range and Level Setting/GEQ (Graphic
Equalizer)
GEQ adjustment is to adjust the level on each frequency band to let you set a tonal quality as you like.
[Default: 0 dB at each frequency; adjustable range: -12 dB to +12 dB (at 2-dB increments)]
© Press SEL to change to the GEQ mode.
s
© Press TRACKS to select the frequency to change the sound
level as follows.
80 —► 160 —► 320 —► 640 —*► 1.6 k —*► 4 k —► 10k (Hz)
i_I
(TRACKS: opposite direction)
'%•
Press j> or <j when using a remote control.
© Press VOL A or VOLV to raise or lower the level.
(Default: 0 dB for each frequency)
The level is 0 dB when the cursor is at the center. Any of the 13
levels can be changed from +12 dB to -12 dB.
•X* Press A or V when using a remote control.
Repeat steps (D and © to adjust the level at each frequency.
The EQ indicator blinks during adjustment, and lights when the level is
set.
CQ-MRX777EUC
27