Publicité
Les langues disponibles
Les langues disponibles
Useful Functions
Switching Spectrum Analyzer Display
Press S*A to change to the spectrum analyzer display in the 16 pat¬
terns {DEMO, WAVE, AURORA, etc).
Note:
• DEMO mode is initially displayed. There may be cases where
the buttons cannot be operated in DEMO mode. If so, change
the spectrum analyzer display to other than DEMO mode.
• Only the spectrum analyzer lamp goes out if BLANK SPEANA
is selected.
• The whole display, including the lights, goes out if ALL DISP
OFF is selected.
(It lights when this operation is performed,
and goes out again in about 5 seconds after the operation.)
\
_
)
Spectrum Analyzer Arrangement
The spectrum analyzer display can be changed as follows.
(Default: NORMAL/Spectrum Analyzer POSI)
0
To change to spectrum analyzer arrangement mode, press and
hold S'A for more than 2 seconds.
The display blinks in spectrum analyzer arrange mode.
CQ-MRX777EUC
39
Publicité
