Panasonic CQ-MRX777EUC Manuel D'utilisation page 50

Installation Guide
(Continued)
Installation Procedures
Note: Disconnect the cable from the negative (-) battery terminal.
1. Secure the Mounting Collar 0.
insert Mounting Collar © into the dashboard, and bend mounting tabs outward with a screwdriver.
Screwdriver
2. Secure the rear of the unit.
a) Check the electrical connection by referring to these operating instructions.
b) Connect the Mounting Bolt
CD,
using a suitable wrench.
c) Insert Power Connector © to the unit.
'' Lock Lever
Make sure that the
lock lever is flush
with the mounting
collar (not projecting
outward).
d) Insert the unit into Mounting Collar © and push it in until "click" is heard.
e) Secure the rear of the unit to the car by either of the two recommended methods.
■ Using the Rear Support Strap ©
Affix one end of the Rear Support Strap © to the rear of the unit, and the other end to the Fire
Wall of Car, or some other metallic area.
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt © on the rear of the unit with Rubber Cushion, and mount it into the existing
Rear Support Bracket.
Fire Wall of Car Rear Support Bracket
48
CQ-MRX777EUC