Panasonic CQ-MRX777EUC Manuel D'utilisation page 16

Radio Basics
(Continued)
Switching Display
Press
DISP
to change the display as follows.
"► Regular Display (Band • Preset number • Frequency)
I
Clock Display
I
— Spectrum Analyzer Display
MONO/LOCAL Selection
• Much interference is reduced during a weak FM stereo broadcasts
when MONO is on. (Only for FM mode)
• Searching stops automatically at a strong signal only when LOCAL
is on.
0
FM broadcasts
Press and hold*(MONO/LOC) for more than 2 seconds to change
the mode until reaching a desired mode, then release.
MONO OFF
LOCAL OFF
t
MONO ON
LOCAL OFF
MONO OFF MONO ON
LOCAL ON LOCAL ON
* Press and hold
MUTE
for more than 2 seconds when using a
remote control.
0 AM broadcasts
Press and hold*(MONO/LOC) for more than 2 seconds to change
the LOCAL mode as follows.
LOCAL OFF <
►
LOCAL ON
Press and hold
MUTE
for more than 2 seconds when using a
remote control.
14
CQ-MRX777EUC