Panasonic CQ-MRX777EUC Manuel D'utilisation page 38

Pre-out (External Output) Setting
(Continued)
Adjusting the volume level
© Press SPC(SUB'W) in the PREOUT THRU mode to change to
LEVEL SELECT mode. (See page 35.)
(D
Press TRACKS*- or TRACKS* to increase or decrease the vol¬
ume.
^°dB, -10 dB <- 0 dB —> +10 dB
dB : No output (no sound) from the amplifier connected to Pre-
out
* Press > or < when using a remote control.
Fader Adjustment Interlock
Setting
Depending on the position where the system-up speaker is connect¬
ed, either the front or rear can be selected to interlock with the volume
balance of the built-in amplifier.
(Default: FRONT)
© Press SPC(SUBW) in the PREOUT THRU mode to change to F/R
SELECT mode. (See page 35.)
(D
Press TRACK^>- or TRACK^^ to switch as follows.
FRONT : Interlock with the front
♦
REAR : Interlock with the rear
%
Press > or < when using a remote control.
CQ-MRX777EUC