Panasonic CQ-MRX777EUC Manuel D'utilisation page 40

(Continued)
(D
When you have set the time, press DISP(CLOCK).
Regular mode is back and the clock starts running again.
Repeat the above steps from ©
to (D
to readjust the clock.
-^
Note:
• Clock adjustment cannot be made when power is off.
• Clock adjustment cannot be made when MD title is displayed. Switch it back to regular display or
clock display before making clock adjustment.
>>-.
—
_
—_______
----
Clock Display ON/OFF
Clock or MD title can be displayed on the character display.
(Default: Regular display of sources)
Press DISP(CLOCK) to change the display as follows.
-► Regular Display
I
Clock Display
I
Spectrum Analyzer Display
I
MD Disc Title
I
-MD Track Title
Note:
• "ADJUST" is displayed in the clock display mode when the clock is not adjusted.
• No changeover to MD title display when the radio, CD, or an external device is in use.
\_____)
Clock Display (Power Off)
Press DISP after turning off the power.
Press DISP to change the display as follows.
—Clock Display • Standby Indicator will light. (Default)
I **'
Clock Display
I
— No Display
-
Note:
• "ADJUST' is displayed in the clock display mode when the clock is not adjusted.
• Clock adjustment cannot be made when power is off.
38
CQ-MRX777EUC