Publicité
Les langues disponibles
Les langues disponibles
Installation Guide
A WARNING
This installation information is designed for experienced installers
and is not intended for non-technical individuals. It does not
contain warnings or caution of potential dangers in attempting to
install this product.
Any attempt to install this product in a motor vehicle by anyone
other than qualified installer could cause damage to the electrical
system and could result in serious personal injury or death.
□ Overview
□ Installation Hardware
This equipment should be installed by a
professional. However, if you plan to install this
unit yourself, your first step is to decide where to
install it. The instructions in these pages will guide
you through the remaining steps: (Please refer to
"WARNING" statement above).
• Identify and label the vehicle wires
• Connect the vehicle wires to the wires of the
power connector
• Install the unit in the dash
• Check the operation of the unit
If you do encounter problems, please consult your
nearest professional installer.
Caution: This unit will operate with a 12 V DC
negative ground auto battery system only. Do not
attempt to use it in any other systems. Doing so
could cause serious damage.
Before you begin installation, look for the following
items included in the packing with your unit.
• Warranty Card
Fill this out promptly
• Panasonic Servicenter for service Directory
Keep this for future reference in case the unit
needs servicing
• Installation Hardware
Needed for in-dash installation
No.
Item
Diagram
Qty
©
Mounting Collar
%
1
©
Hex. Nut (5 mm(J))
©
1
©
Rear Support Strap
1
©
Tapping Screw
(5 mm<j> x 16 mm)
1
©
Mounting Bolt (5 mm<t>)
&
1
©
Power Connector
&
1
©
Removable Face Plate
Case
1
©
Remote Control Unit
IS
1
©
Trim Plate
1
©
Lithium battery
©
1
CQ-MRX777EUC
45
Publicité
