MINN KOTA TERROVA Instructions D'installation page 27

6
i. If installing directly to a Solix or Apex, the connector
will be flat on the back of the fish finder display.
j. Align the Receptacle on the Ethernet Cable with the
Eight Pin Connector on the Apex or Solix fish finder.
Notice the keyed connectors. Tighten the Collar
from the Ethernet Cable to secure the connection.
Once directly installed to the Solix or Apex, the
connection is complete.
7
ITEM(S) NEEDED
k.
If installing directly to a Helix Adapter Cable
(Item #15), align the Receptacle on the Ethernet
Cable with the Eight Pin Connector on the Helix
Adapter Cable provided. Notice the keyed
connectors. Tighten the Collar from the Ethernet
Cable to secure the connection.
NOTICE: Minn Kota provides one Helix Adapter Cable
(AS EC QDE - Ethernet Adapter Cable -
with every trolling motor equipped with Advanced
GPS Navigation.
l. The Helix Adapter Cable directly connects the
Ethernet Cable to a Helix fish finder. Locate the
Helix Adapter Cable Keyed Connector on the
back of the fish finder. Plug the Helix Adapter
Cable into the back of the Helix fish finder to
complete the connection.
©2024 Johnson Outdoors Marine Electronics, Inc.
#15 x 1
7k
Ethernet Ethernet
Cable Cable
720074-1)
7l
ADVANCED GPS NAVIGATION
Receptacle Receptacle
Ethernet Ethernet
Cable Cable
Receptacle Receptacle
Ethernet Ethernet
Cable Cable Helix Adapter Helix Adapter
Cable Cable
Eight Pin Eight Pin
Connector on Connector on
Solix or Apex Solix or Apex
Fish Finder Fish Finder
Eight Pin Eight Pin
Connector Connector
Helix Adapter Cable Helix Adapter Cable
Adapter Adapter
Cable Keyed Cable Keyed
Connector Connector
Plug into Plug into
Helix Fish Helix Fish
Finder Finder
minnkota.johnsonoutdoors.com | 27