MINN KOTA TERROVA Instructions D'installation page 21

2
d. If installing directly to a Solix or Apex, the connection
will be flat on the back of the fish finder display.
e. Align the pins on the Accessory Cable with the
receptacle on the fish finder. Notice the keyed
connections. Tighten the Collar from the accessory
cable to secure the connection. Once directly
installed to the Solix or Apex, the connection
is complete.
3
f.
If installing directly to a Built-in MEGA Down
Imaging Extension Cable, align the pins on the
accessory cable with the receptacle on the
extension cable. Notice the keyed connectors.
Tighten the Collar from the accessory cable to
secure the connection.
g. If the Built-in MEGA Down Imaging Extension Cable
will be attached directly to a Humminbird® Solix
or Apex, the connection will look exactly like the
installation directly into a Humminbird Solix or Apex
fish finder.
NOTICE: A 10-foot extension cable
(EC M3 14W30 - 30' transducer extension cable -
©2024 Johnson Outdoors Marine Electronics, Inc.
Imaging Accessory Cable Imaging Accessory Cable
(EC M3 14W10 - 10' transducer extension cable -
720106-2) are available from humminbird.johnsonoutdoors.com.
BUILT-IN MEGA DOWN IMAGING
Fourteen Pin Connector Fourteen Pin Connector
Built-in MEGA Down Built-in MEGA Down
Imaging Accessory Cable Imaging Accessory Cable
from Trolling Motor from Trolling Motor
Fourteen Pin Fourteen Pin
Connector Connector
Collar Collar
Built-in MEGA Down Built-in MEGA Down
from Trolling Motor from Trolling Motor
720106-1) and a 30-foot extension cable
Solix or Apex Solix or Apex
Fish Finder Fish Finder
Receptacle Receptacle
Built-in MEGA Down Imaging Built-in MEGA Down Imaging
Extension Cable Extension Cable
minnkota.johnsonoutdoors.com | 21