MINN KOTA TERROVA Instructions D'installation page 11

Installing the Foot Pedal
1
ITEM(S) NEEDED
#13 x 4
a. Take the Foot Pedal (Item #EE) and turn it over.
Put a Foot Pedal Pad (Item #13) in each of the
pad locations.
NOTICE: Adding the Foot Pedal pads is optional. The
pads are recommended when using the Foot Pedal on
non-carpeted surfaces.
2
b. Locate the Foot Pedal Cord that exits the Mount of
the trolling motor, next to the Power Cord. Unscrew
the Cap on the Plug.
c. Locate the 4-pin Plug from the Foot Pedal and
unscrew the Cap.
d. Align the 4-pin Plug from the Foot Pedal with the Plug
on the trolling motor. Firmly push the Plugs together.
Secure the connection by rotating the collar on the
Foot Pedal Power Cord in a clockwise direction.
NOTICE: The connectors are keyed to prevent
reversed installation.
NOTICE: When the Foot Pedal Cord is not in use, ensure
that the Cap is on and firmly secured.
©2024 Johnson Outdoors Marine Electronics, Inc.
#EE x 1
2b
2d
INSTALLING THE FOOT PEDAL
Foot Pedal Foot Pedal
Bottom Bottom
Foot Pedal Foot Pedal
Pad Pad
Placement Placement
Mount Mount
Foot Pedal Foot Pedal
Cord from Cord from
Trolling Motor Trolling Motor
Power Power
Cord Cord
Cap Cap
Foot Pedal Cord Foot Pedal Cord
from Foot Pedal from Foot Pedal
4-pin Plug 4-pin Plug
2c
Cap Cap
Foot Pedal Foot Pedal
Cord from Cord from
Foot Pedal Foot Pedal
Foot Pedal Foot Pedal
Foot Pedal Foot Pedal
Cord from Cord from
Trolling Trolling
Motor Motor
minnkota.johnsonoutdoors.com | 11