MINN KOTA TERROVA Instructions D'installation page 18

DUAL SPECTRUM CHIRP
4
ITEM(S) NEEDED
h. If installing directly to a Helix Adapter Cable, align
the pins on the accessory cable or extension cable
with the receptacle on the Helix Adapter Cable
(Item #17). Notice the keyed connectors. Tighten
the Collar from the accessory cable or extension
cable to secure the connection.
i. If the Helix Adapter Cable will be attached directly
to a Humminbird® Helix, plug it in the Helix
Adapter Cable Keyed Connection on the back of the
fish finder.
NOTICE: If connecting to other fish finders on the
market, check for compatibility or any required adapter
cables online at minnkota.johnsonoutdoors.com.
j. If the trolling motor has more than one external
connector for an output device, complete the
connection for that specific output and then follow
the instructions for "Securing Accessory Cables" to
complete the output cable installation.
NOTICE: If unsure of what features the trolling motor
may be installed with that require connection to an
output device, please review the "Identifying Trolling
Motor Features and Their Associated Cables" section of
this manual.
18 | minnkota.johnsonoutdoors.com
#17 x 1
4h
4i
Fourteen Pin Fourteen Pin
Connector Connector
Collar Collar
Dual Spectrum CHIRP Accessory Dual Spectrum CHIRP Accessory
Cable or Extension Cable Cable or Extension Cable
Helix Adapter Helix Adapter
Cable Cable
©2024 Johnson Outdoors Marine Electronics, Inc.
Receptacle Receptacle
Helix Adapter Cable Helix Adapter Cable
Adapter Adapter
Cable Keyed Cable Keyed
Connector Connector
Plug into Plug into
Helix Fish Helix Fish
Finder Finder